Don't Fall For A Pretty FaceBy Charles Fort
Published: August/September 2013
Hiring a professional surveyor before you buy could be the most important decision you'll make.
Get The Right Survey
There are three main types of surveys done on a boat you're considering buying, and each requires a specialized professional to do them well.
- A condition and valuation survey (C&V) covers the hull and structures as well as the boat's systems. This type of thorough survey is usually required for insurance and financing, and is sometimes referred to as a pre-purchase survey. Whether your insurance company or lender requires it or not, you should always get one before buying. A proper C&V survey requires the boat to be hauled so the hull and underwater gear can be inspected. A good hull surveyor inspects a boat top to bottom, fore and aft. They'll look at the hull and deck and determine by sounding with a hammer and moisture meter whether there are voids or delamination, and they can identify places in the core that may eventually rot and become soft (and expensive to repair) before they're detectable by a buyer. A surveyor checks the condition of AC and DC electrical systems, plumbing and through-hulls, deck hardware, propane and fuel systems, steering and controls, and safety equipment. A proper marine survey will be an in-depth written report that evaluates the boat according to U.S. Coast Guard regulations, as well as American Boat and Yacht Council (ABYC) and National Fire Protection Association (NFPA) standards. A knowledgeable surveyor will also know if a specific make has a history of major problems.
- Engine surveys cover the operation and condition of propulsion and generator engines. Typically, they include inspection of controls, electrical, cooling, and exhaust systems, as well as engine mounts. Compression, engine, and exhaust temperatures are also checked, and engine surveys typically include tests of oil samples, too. But how do you know if you need one? Alison Mazon, a surveyor in Portland, Oregon, is one of a handful of hull surveyors who also do engine surveys. "An engine survey is warranted for particularly expensive or complex engines, and those with obvious lack of maintenance," says Mazon. "Many larger engines built since about 2006 have computers that can be read by trained personnel with the right equipment. A quick scan for computer faults may be a sign a more detailed analysis is needed."
- A rigging survey looks at the condition of a sailboat's mast and boom and associated rigging. Inspections are made of attachment points, welds, standing and running rigging, and the mast step. Rigging surveyors either go up the mast or inspect the rig when it's off the boat. Whether a rigging survey is needed depends on the age, prior use of the rig, and its intended purpose. Red flags that would signal the need for a rigging survey include a rig more than 10 years old, frayed stays, cracked swages, weeping chainplates, and turnbuckles that are bottomed out. The rig also needs to be surveyed if the boat will be used offshore or heavily raced.
Offerings from manufacturers can take the risk out of service contracts, but know the facts before you buy any contract
The right broker can reduce stress and make the transaction go smoothly and painlessly
A marine surveyor is hired to protect your interests and to make sure a boat is sound. Here's how to find the best one