Beneteau Oceanis 350

Construction of the Oceanis 35 utilizes a solid fiberglass composite hull and balsa-cored decks. Plywood replaces balsa as the core material in the area of hardware attachments. The deck and hull are joined in a shoebox fashion and pop-riveted together along the overlap. The seam is then hidden with a rail molding screwed and bolted in place. A considerable amount of the strength and rigidity of the structure is provided by a molded fiberglass composite hull liner that incorporates all floors, frames, stringers and rigging attachment points and is bonded into the hull before the deck is installed. This is an efficient and an increasingly popular method of construction of production fiberglass boats but has the drawback of creating a structure that is virtually impossible to examine, once put together, without destructive methods. The keel is iron, and the wings on the shoal draft version are bolted on.

Auxiliary power is provided by a 28 hp, three cylinder, Volvo diesel which is sufficient for the size and weight of this boat. The engine is dependable, and trained service mechanics are readily available. By the time Beneteau introduced the Oceanis 350 they had already begun to dominate charter boat fleets and influences of charter operator requirements are apparent in the interior design and cabin arrangements. Private accommodations for at least two couples are essential to charter operators, and the standard Oceanis 350 layout provides a forward v-berth cabin and a port side quarter berth cabin aft. Some European-built boats were built with port and starboard quarter berth cabins aft.

When a designer draws three separate cabins into a 34-foot boat something has to be sacrificed. In this case, it's drawers and lockers with doors for convenient, accessible storage. Storage is adequate but limited to sometimes oddly shaped areas behind seats and under berth cushions which are not particularly accessible. Ventilation of the cabin spaces of the Oceanis 350 is, simply put, inadequate. There is only one small deck hatch on the foredeck which is barely large enough for a grown adult to crawl through, let alone pass a good sized sail bag through, and the only opening port is in the head area.

The sail area to displacement ratio of the Oceanis 350 is only 16.2, which suggests this is not going to be a great performer in light air. On the other hand, the ballast to displacement ratio of less than 40%, and its relatively shallow draft doesn't suggest great sail carrying ability in strong winds either. The relatively wide beam should help with initial stability, but its effect gets lost as the wind picks up and heel angles increase. I would suspect the ideal wind range for this boat is 8 to 18 knots. Windward performance should be acceptable with a relatively shallow canoe body, broad stern, and no skeg forward of the rudder. However, these hull characteristics lead me to believe that the boat will be a little skittish off the wind in adverse weather conditions.

Caution is advised due to the fact that Beneteau has not always adhered strictly to American Boat & Yacht Council's Recommended Standards and Practice when it comes installation of electrical and propane systems. You may find yourself having to update these systems to satisfy the requirements of your insurance company. Although not well suited for long offshore passages, the Oceanis 350 serves owners well as a comfortable daysailer and for limited cruising under not too extreme conditions. All in all the Beneteau Oceanis 350 offers modern styling, reasonable performance and roomy accommodations at a price that is hard to beat in a boat of this vintage and size. Prices range from under $45,000 to over $75,000 depending on age and condition.