] ]

 
] ] ]
]
Welcome Guest ]
]
] ]

] ] ]
]
Site Navigation ]
]
] ]

] ] ]
]
Top 10 Recent Posts ]
View Last Post 1991 Four Winns 365
Last Post By: Blue Moon 138
Forum: Four Winns

Posted: July 16 2014 at: 17:35

View Last Post Murray Chris Craft Constellations
Pages 1 2 3 4 ... 149 » 150
Last Post By: Capt.Wayne
Forum: Chris Craft

Posted: June 27 2014 at: 16:27

View Last Post Seat Cushions
Last Post By: Michael Acord
Forum: Sea Fox

Posted: June 06 2014 at: 16:02

View Last Post Sail cleanin’ and hull patchin’
Last Post By: dad21dawg
Forum: Hunter

Posted: May 29 2014 at: 16:01

View Last Post 1983 25’ Chris Craft Catalina
Last Post By: fred6963
Forum: Chris Craft

Posted: May 27 2014 at: 14:26

View Last Post 1963 Constellation 42
Last Post By: spellbound
Forum: Chris Craft

Posted: May 06 2014 at: 08:31

View Last Post Viking Yachts Links
Last Post By: Viking44
Forum: Viking Yacht

Posted: April 17 2014 at: 06:32

View Last Post Amerosport 320
Last Post By: Jerry737
Forum: Chris Craft

Posted: April 13 2014 at: 16:00

View Last Post Any Uniflite Owners near Berkeley CA???
Last Post By: concordian
Forum: Uniflite

Posted: March 08 2014 at: 02:27

View Last Post Inverter
Last Post By: eshover
Forum: Chris Craft

Posted: February 03 2014 at: 11:32

]
] ]
   
Scout
 BoatUS Boat Groups/Manufacturer Forums>>Scout
Subject Topic: Scout Links Post ReplyPost New Topic
 
] ] ]
]
Author
Message Prev Topic | Next Topic 
Sonja Lowe
Admin


Admin

Joined: January 15 2004
Posts: 118
Posted: July 19 2006 at 14:51 | IP Logged Quote Sonja Lowe

Scout Manufacturer's Link: http://www.scoutboats.com/

Feel free to hit "Reply" and add any relevant links. Please ntoe, we will delete any inappropriate links.

Back to Top Printable version View Sonja Lowe's Profile Search for other posts by Sonja Lowe
 
RangerJ
"Seaman Recruit"




Joined: July 20 2008
Posts: 1
Posted: July 20 2008 at 09:00 | IP Logged Quote RangerJ

Hi - I guess I am first.

 

I bought a 1989 Scout 152 at the beginning of this spring, with an 89 Yamaha 55 hp motor. It came complete with everything I needed to take it out, PFDs, flares, etc. Amazingly, everything on the boat and trailer worked and it passed the USCG courtesy inspection with no problem.

I use a 16' Boston Whaler almost everyday April-November and am amazed at how much better the Scout handles a chop than the Whaler, despite a similar hull design. Not that I am knocking the Whaler - I consider them indestructable and the one I use is a 1970 and it is in very seaworthy condition. It's just that the Scout takes the waves easier.

The Yamaha purrs like a kitten at speed but tends to foul the plugs after an extensive idle. It is also hard as heck to start, but both things are something that I am fairly good at overcoming. It is also something of a gas hog but by keeping my speed steady at @22 - 25 mph, I can get about 9 miles per gallon.

All in all, I love the boat and would recommend one to anybody.

 

 

Back to Top Printable version View RangerJ's Profile Search for other posts by RangerJ
 
Capt Andrea
"Seaman Recruit"




Joined: June 22 2009
Posts: 3
Posted: July 01 2009 at 13:18 | IP Logged Quote Capt Andrea

We just bought a 2007 (leftover) Scout 160.  It's our first "powerboat"; we're sailors and wanted something we could use to run around in at the Jersey shore and that my son can use fishing.  It's powered by a Yamaha 60.  The boat goes in the water tomorrow, so we're hoping it handles well.  We'll be using it inshore, but we cross the inside of a large inlet so the swells can build.  The Scout seems to be a very well-built boat.  It's finished nicely inside all hatches, with no raw edges.  My only concern is the plug on the bow for the running lights.  I think water may get in there, even though there is a plug cover. 



__________________
Capt. Andrea Tursi
Key of Sea IV
Beneteau 373
Longport, NJ
Back to Top Printable version View Capt Andrea's Profile Search for other posts by Capt Andrea
 
scout185cc
"Seaman Recruit"




Joined: November 20 2007
Posts: 3
Posted: July 01 2009 at 15:23 | IP Logged Quote scout185cc

I've posted this in another location in this forum, but will now publish this in the Scout forum.  Any help will be appreciated.

I have a 2005 Scout 185 CC with the factory swim platform. I am interested in installing trim tabs on the boat and/or a hydrofoils (like dolfins) on the motor.  Has anyone tried this?  What did you install?  As to trim tabs, where on the transom were they install?  Towards the bottom or nearer to the sides?  Did you see an improvement in the stability, ride, trim of the boat and hole shot?  Thanks.

Back to Top Printable version View scout185cc's Profile Search for other posts by scout185cc
 
]
] ]
 

If you wish to post a reply to this topic you must first login
If you are not already registered you must first register

  Post ReplyPost New Topic

] ] ]
]
  ]
Printable version Printable version
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum
]
] ]

] ] ]
]
©2014, Boat Owners Association of The United States. All Rights Reserved.
This page was generated in 1.0313 seconds.
]
] ]