Chris Craft
BoatUS Boat Groups/Manufacturer Forums>>Chris Craft

Topic: 1990 Chris Craft 372 Catalina

Author Message Prev Topic | Next Topic  jm14246 "Seaman Recruit" Joined: May 11 2010 Posts: 2 Posted: May 23 2011 at 18:30 | IP Logged boat has three bilge pumps, in the main engine room, aft cabin and forward cabin.  Are these areas connected in any way so the if the main fails the others would help out for awhile? Back to Top    boatman66 "Commander" Joined: August 19 2007 Posts: 1123 Posted: May 26 2011 at 08:40 | IP Logged JM 14246 YOUR BILGE PUMPS SHOULD ALL BE WIRED SEPERATELY AND HAVE THEIR OWN TRIGGER FOR PUMPING (FLOAT SW)AND THEIR OWN SWITCHES FOR AUTO/MANUAL I HAVE A 294 AND HAVE FOUR PUMPS AND ALL WORK INDEPENDENTLY OF EACH OTHER--IF YOU MEAN FOR THE WATER TO TRAVEL FROM ONE AREA TO THE OTHER YES THERE SHOULD BE AT THE VERY BOTTOM ABOVE THE KEEL INSIDE A WAY FOR THE WATER FROM SAY THE CABIN TO GO TO THE BACK OF THE BOAT HUNT HARD IT SHOULD BE A ONE INCH OR SO HOLE MINE HAS THAT FEATURE-PS FURTHER POSTS SHOULD AND CAN BE MADE ON THE CATALINA LINE SEE IT??THAT IS WHERE WE ALL ARE AND WELCOME ABOARD--FEEL FREE TO POST THERE  __________________ 1986 294 catalina twin 350's Back to Top

If you wish to post a reply to this topic you must first login
If you are not already registered you must first register

Printable version You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum