| Posted: July 07 2010 at 19:19 | IP Logged
|
|
|
Hello, I am new to this forum and thought I would ask this question. I just purchased a 1974 36 Uniflite . The fuel valve is set so that both engines can run off both tanks. Meaning all three valves or open. I noticed that both engines are using the starboard tank only. I am going to shut the center valve off and run the port engine and hope it pulls from it's port tank. Any thoughts on why the engines are only pulling from one tank when all valves are open?
Thanks Steve
__________________
steve
|
![]](http://www.boatus.com/boatgroups/skins/azar/forum_images/spacer.gif){kind=spacer}
![]](http://www.boatus.com/boatgroups/skins/azar/forum_images/header-bg.jpg)
![]](http://www.boatus.com/boatgroups/skins/azar/forum_images/top-left.gif)
![]](http://www.boatus.com/boatgroups/skins/azar/forum_images/top-right.gif)
![]](http://www.boatus.com/boatgroups/skins/azar/forum_images/left-side-table-bg.gif)
![]](http://www.boatus.com/boatgroups/skins/azar/forum_images/right-side-table-bg.gif)
![]](http://www.boatus.com/boatgroups/skins/azar/forum_images/bottom-left.gif)
![]](http://www.boatus.com/boatgroups/skins/azar/forum_images/hide_min.gif)
Topic: Uniflite 36 aft fuel valves problem?
