Doral
BoatUS Boat Groups/Manufacturer Forums>>Doral

Topic: boarding ladder

Author Message Prev Topic | Next Topic  timberline "Seaman Recruit" Joined: March 23 2008 Posts: 8 Posted: April 27 2008 at 21:38 | IP Logged I want to install a windline 4 step boarding ladder on my 270 SC. The swim step is balsa cored, I have read a little bit on through bolting cored sections, but can not recall where I found the info. My plans are to drill 1/4 inch hole clear through top layer of fiberglass the balsa and the bottom layer of fiberglass, then enlarge the top hole to 3/8 inch and remove the balsa about 1 inch beond the top hole and fill this void with epoxy, redrill the 1/4 inch holes to bolt the ladder on, seal it good with 5200 and keep my fingers crossed. What do you guys think? __________________ 270sc Back to Top

If you wish to post a reply to this topic you must first login
If you are not already registered you must first register

Printable version You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum