Toms Tips on Buying Flashlights
By Tom Neale - Published December 22, 2011 - Viewed 840 times
1. No longer do we have to rely on the bogus billion candle power claims when buying lights.
2. On August 18, 2009, the ANSI/NEMA FL 1 FLASHLIGHT BASIC PERFORMANCE STANDARD was approved as an American National Standard. The National Electrical Manufactures Association (NEMA) www.nema.org says that it is intended to cover basic performance of hand-held/portable flashlights, spotlights and headlamps providing directional lighting. (I discussed it in an article in BoatUS Magazine.)
3. Total light output is expressed in lumens which represent the lights overall visible light energy. This is largely a function of the power of the lights bulb or LED and is not a measurement of how bright a target will appear when the light is trained on it.
4. Peak Beam Intensity is expressed as candela and is the value that represents the brightest spot in the lights beam when it is focused on a target. It is a combination of the bulb or LED output, combined with the effectiveness of the lights reflector in producing a focused beam.
5. Run Time measures the duration of a lights runtime from the initial light output value (thats 30 seconds after the light is turned on with fresh batteries) until the light output drops to 10% of the initial value.
6. There are other categories of the standard. Look for lights with values from these standards on the packaging. See more about the standards at http://www.streamlight.com/Documents/ansi/ansi-pres.pdf.
Go to www.tomneale.com for other information
Boating and water sports involve risk. Any comments herein should be followed at your own risk. You assume all responsibility for risk or injury to yourself or others. Any person or entity that uses this information in any way, as a condition of that use, agrees to waive and does waive and also hold authors harmless from any and all claims which may arise from or be related to that use.
There are 0 blog comments.
Sorry there are no blog comments.
|Post Blog Comments|
Sorry but you must be logged in to submit comments.