Viewing Blog

View All Blogs | View Blogs by Tom Neale | View Blogs in Tom & Mel Neale’s Boating Tips

Tags for Tom’s Tips About Using Air

Air  Compressor  Quick  Connect  Fittings  

<- Previous Blog by Tom Neale | Next Blog by Tom Neale ->

Tom’s Tips About Using Air

By Tom Neale - Published September 30, 2010 - Viewed 968 times

1. Even air can cause injury. Obviously don’t squirt it in your eye etc. Also be on guard for dust or small particles of debris becoming airborne.

2. Quick connect devices make it much easier and quicker to change tools. These are readily available and not too expensive. Be sure you get the right size for the fittings and your tools.

3. If you’re using a quick connect fitting be careful to turn off the tank valve and empty the hose before you pull the collar back on the fitting. If you don’t, the air pressure in the hose can blow off the connected tool, possibly causing damage and injury.

4. The little 12 volt compressors for topping up car tires are seldom if ever adequate for the type of jobs contemplated here. These compressors aren’t strong enough or fast enough.

Go to www.tomneale.com for other information

Boating and water sports involve risk. Any comments herein should be followed at your own risk. You assume all responsibility for risk or injury to yourself or others. Any person or entity that uses this information in any way, as a condition of that use, agrees to waive and does waive and also hold authors harmless from any and all claims which may arise from or be related to that use.

Copyright 2004-2010 Tom Neale





Blog Comments

There are 0 blog comments.

Sorry there are no blog comments.

Post Blog Comments
Message:

Sorry but you must be logged in to submit comments.