|<- Previous Blog by Tom Neale | Next Blog by Tom Neale ->|
Toms Tips About Through Hulls
By Tom Neale - Published February 08, 2007 - Viewed 1425 times
1. Don’t do this at home, or anywhere else.
2. It helps to hire a diver (or do it yourself if you can safely do so) to occasionally inspect your through hulls from the outside. Sea creatures such as barnacles and mussels and clams can grow in there more quickly than you think.
3. Check regularly to see that the bonding wires to your through hulls have good contact and are corrosion free. Corrosion can occur here quickly.
4. If you ever get hit by lightning, consider through hulls and their valves to be prime suspects for damage. It may not be readily apparent, but it could sink your boat.
5. Follow the manufacturer’s instructions as to regular maintenance. It’s hard to remember to do because they’re usually out of sight and out of mind, but it’s important.
Go to www.tomneale.com for other information
Boating and water sports involve risk. Any comments herein should be followed at your own risk. You assume all responsibility for risk or injury to yourself or others. Any person or entity that uses this information in any way, as a condition of that use, agrees to waive and does waive and also hold authors harmless from any and all claims which may arise from or be related to that use.
Copyright 2004-2010 Tom Neale
There are 0 blog comments.
Sorry there are no blog comments.
|Post Blog Comments|
Sorry but you must be logged in to submit comments.