|<- Previous Blog by Tom Neale | Next Blog by Tom Neale ->|
Toms Tips About Bailing With a Shovel
By Tom Neale - Published December 24, 2009 - Viewed 1084 times
1. Even if ice on the water is very thin, it can be very sharp. It cut into your bottom paint and take it off. It can also cut into the gel coat. This may not happen at first, but will as the ice begins to melt and wind pushes the sharp sheets against your hull.
2. If you are in winter climes and keep a boat in the water or have a dock, it may a wise move to invest in an “ice eater” device unless you are in a marina which already has one.
3. This type of device not only protects the boat, it protects the dock.
4. These devices are typically either propellers in funneling casings that are submerged and that propel warmer water from the bottom to the top, melting ice, or they are bubblers that create bubbles from the bottom warmer layers of water. With both types, both the rising of warmer water and the agitation helps to dispel ice.
5. Modern models consume far less electricity that the ones we used years ago.
6. We have a model that includes a control box which will turn the unit on and off according to the times and temperatures that you set.
Go to www.tomneale.com for other information
Boating and water sports involve risk. Any comments herein should be followed at your own risk. You assume all responsibility for risk or injury to yourself or others. Any person or entity that uses this information in any way, as a condition of that use, agrees to waive and does waive and also hold authors harmless from any and all claims which may arise from or be related to that use.
Copyright 2004-2009 Tom Neale
There are 0 blog comments.
Sorry there are no blog comments.
|Post Blog Comments|
Sorry but you must be logged in to submit comments.